Description
Introduction
CS-MIPI-IMX307 is a highly cost-effective CSI-2 (MIPI) interface camera module, using SONY STARVIS IMX307 image sensor,
built-in excellent ISP image processing, convenient for customers to quickly integrate and release products.
Features
- SONY IMX307 STARVIS Sensor, 1/2.8 inch 2 Mega
- Built-in ISP processing
- CSI-2 Interface
- Uncompressed UYVY format, YUV422-8bit
- Standard lens mount
- IR-CUT circuit
- BLC, Digtal WDR, 2D/3D noise reduction, Anti-fog
- Brightness, Contrast, Sharpness, Saturation adjustable
- Framerate Continuously Adjustable
- Support Multi-camera Module Video Stream Synchronization
- Support firmware upgrade via USB disk
- Support Raspberry PI Platform,RK3399, NVIDIA JETSON Platform
Technical Detail
| Technical Details | |
| SENSOR | |
| Sensor | SONY IMX307LQD-C STARVIS |
| Pixels | 2.07M pixels |
| Resolution | 1920*1080 |
| Image Size | Diagonal 6.46 mm (Type 1/2.8) |
| Unit Cell Size | 2.9um (H)*2.9um(V) |
| Output Format | Bayer |
| Shutter Type | Rolling Shutter |
| SNR1s Value | 0.24lx |
| ISP | |
| Frame Rate | 1080p@max25fps / 30fps，720p@max50fps / 60fps(cropping mode)，VGA@max130fps(cropping mode) |
| Frame Rate Adjustment | Framerate Continuously Adjustable |
| Exposure | Auto or Manual |
| White Balance | Auto or Manual |
| Shutter | 1/25(1/30)s to 1/20,000s |
| Slow Shutter | Coming Soon |
| Denoising | 2D/3D noise reduction |
| Image Setting | Brightness, Contrast, Sharpness, Gamma, Saturation,Flip, Mirror |
| Image Enhancement | BLC, Digtal WDR, Defog |
| Day/Night Switch | Manual or IR-CUT filter with external trigger |
| Video Stream Synchronization | Support Multi-camera Module Video Stream Synchronization |
| Other Functions | Pick Mode：Pick Picture from Video Stream |
| Lens & IR-CUT | |
| Lens | MTV12 / MTV16 / CS |
| Lens Mount | M12*P0.5 / M16*P0.5 / CS，IRCUT is optional |
| Mounting Hole | 2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing |
| Interface | |
| Connector | 15PIN FPC, Compatible with Raspberry PI，JETSON NANO |
| Communication Interface | IIC, 3.3VDC |
| Video Data Interface | CSI-2 : 2 Data Lanes, CSI-2 YUV422-8bit Data Type, Datarate=594Mbps/lane |
| IR-CUT Control | IR-CUT motor control, 3.3VDC |
| Day/Night External Trigger | 3.3VDC to 5VDC compatibility |
| General | |
| Operating Conditions(Bare PCB) | Performance guarantee temperature：-10℃~60℃, Humidity 95% or less, non-condensingOperating guarantee temperature： -30℃~85℃, Humidity 95% or less, non-condensing |
| Power Supply | 5VDC / 3.3VDC optional |
| Power Consumption | 1.4W |
| Dimension | 38mm*38mm*12mm(not include lens and lens mount) |
Spectral Sensitivity Characteristics
| Sensor | Spectral Sensitivity |
| IMX307LQD-C |
IMX307LQD-C Spectral Sensitivity |
Interface & Pin list
| J1 : Firmware Update | ||
| Pin NO. | NAME | Remarks |
| 1 | VBUS(5V) |
Connect the USB upgrade cable & USB disk |
| 2 | D- | |
| 3 | D+ | |
| 4 | GND | |
| J3 : Power Input | ||
| Pin NO. | NAME | Remarks |
| 1 | VCC5V | use by default. How to use 3.3V power supply |
| 2 | GND | |
| J4 : Day/Night External Trigger | ||
| Pin NO. | NAME | Remarks |
| 1 | IR LED ON | INPUT，Low level active（Image to MONO），3.3VDC to 12VDC compatibility |
| 2 | GND | |
| 3 | RESERVE | NC |
| J6 : IRCUT Control | ||
| Pin NO. | NAME | Remarks |
| 1 | IRCUT1 | |
| 2 | IRCUT2 | |
| J6 IRCUT Control Functional specifications | ||||
| MODE | pin | Signal polarity | Image type | Filter position |
| Mode 1 | IRCUT1 | + | color | Infrared cutoff |
| IRCUT2 | – | |||
| Mode 2 | IRCUT1 | – | mono | Full wavelength pass |
| IRCUT2 | + | |||
| J7 : Multi-function GPIO | ||
| Pin NO. | NAME | Remarks |
| 1 | GPIO0 | Can Be Configured As Video Stream Synchronization Signal |
| 2 | GND | |
| 3 | GPIO1 | Can Be Configured As Video Stream Synchronization Signal |
| J8 : CSI-2 Interface | ||
| Pin NO. | NAME | Remarks |
| 1 | GND | |
| 2 | MIPI_L0_N | |
| 3 | MIPI_L0_P | |
| 4 | GND | |
| 5 | MIPI_L1_N | |
| 6 | MIPI_L1_P | |
| 7 | GND | |
| 8 | MIPI_CK_N | |
| 9 | MIPI_CK_P | |
| 10 | GND | |
| 11 | NC | |
| 12 | NC | |
| 13 | SCL | 3.3V Level |
| 14 | SDA | 3.3V Level |
| 15 | VCC3V3 | NC by default，How to use 3.3V power supply |
Board Dimension
