Category: SKU: USB2CANFD-X2 Tag:




The InnoMaker USB2CANFDX2 adapter supports High-speed USB 2.0 2 channel CANFD interface and 1 channel SW interface(CAN0 Only)enables the connection of CAN FD and SW networks to a Windows/Linux/MacOS computer device via USB. Each CAN FD channel is separately isolated against USB and sw with a maximum of 2500 Volts.The new CAN FD standard (CAN with Flexible Data rate) is primarily characterized by higher bandwidth for data transfer. The maximum of 64 data bytes per CAN FD frame (instead of 8 so far) can be transmitted with bit rates up to 12 Mbit/s. CAN FD is downward-compatible to the CAN 2.0 A/B standard, thus CAN FD nodes can be used in existing CAN networks. However, in this case the CAN FD extensions are not applicable.

Hardware Feature

  • Complies with CAN specifications 2.0 A/B and FD
  • Support dual channel CAN FD,1 channel Single Wire CAN (Only CAN0)
  • Support ISO CAN FD And Bosch CAN FD, Software switchable
  • CAN FD bit rates data field (64 bytes max.) from 25 kbit/s up to12Mbit/s
  • CAN bit rates from 25 kbit/s up to 1 Mbit/s;
  • Dual Channel Signal &Power Separately isolated maximum Up to 2500 Volts against USB;


Software Feature

  • Time stamp Resolution Up to 1 μs;
  • CAN termination Activated/Deactivated Through Software;
  • InnoMaker CAN Clock Signal Switcher Technic Enable Setting any baud rate;
  • Support CAN clock settings, free to use baud rate calculation tool.
  • Signal Isolator with 200Mbps enable minimum loop delay, allowing CAN FD data bit rates up to 12Mbps.
  • Peak System Software Compatible
  • Software For Linux (Socket CAN,CLI),Windows, Mac OS;
  • Provide Developer SDK


Additional information


InnoMaker Software Version, Peak System Compatible Version

Product Enquiry