Sale! 1000BASE-T1-TX $490.00 Original price was: $490.00.$390.00Current price is: $390.00. About this item Establishes a direct point-to-point conversion between automotive ECU’s using 1000BASE-T1/BroadR-Reach(1000 Mbit/s Fullduplex,) and any standard Fast Ethernet (1000 Mbit/s, 1000BASE-TX) device with an standard ethernet RJ45 connector. Comes with 1x Unshielded Twisted Pair (UTP) cable and 1x 12V power adapter. By using the Broadcom BroadR-Reach PHY BCM89881B1BFBG, ensure a trustworthy and effective tool to customers that are looking for a cost-efficient, quick and manageable solution for testing requirements, with no latency and no packet loss. Features with 1000BASE-T1 Master / Slave configuration and link LED. Plug and Play, No need to install the drivers. 100M and 1000M modes can be switched manually. Github: https://github.com/INNO-MAKER/100BASE-T1-TX-and-1000BASE-T1-TX Add to cart
Sale! 100BASE-T1-TX $310.00 Original price was: $310.00.$210.00Current price is: $210.00. Features: Establishes a direct point-to-point conversion between automotive ECU’s using 100BASE-T1/BroadR-Reach(100 Mbit/s Fullduplex,) and any standard Fast Ethernet (100 Mbit/s, 100BASE-TX) device with an standard ethernet RJ45 connector. Comes with 1x Unshielded Twisted Pair (UTP) cable and 1x 12V power adapter. By using the BCM BroadR-Reach PHY BCM89811B1AWMLG, ensure a trustworthy and effective tool to customers that are looking for a cost-efficient, quick and manageable solution for testing requirements, with no latency and no packet loss. Features with 100BASE-T1 Master / Slave configuration and link LED. Plug and Play, No need to install the drivers. Github: https://github.com/INNO-MAKER/100BASE-T1-TX-and-1000BASE-T1-TX Add to cart
Sale! 100BASE-T1-TX Media Converter $146.00 - $159.00 Features: 100BASE Ethernet Media Converter establishes a direct point-to-point conversion between automotive ECU’s using 100BASE-T1(100 Mbit/s Fullduplex,) and any standard Fast Ethernet (100 Mbit/s, 100BASE-TX) device with an standard ethernet RJ45 connector. 100BASE Ethernet Media Converter comes with 1x TE MATEnet and 1x MOLEX adapter. Do not provide the over unshielded twisted pair (UTP) cables. No extra hardware or software is needed to connect the device with a PC or a Laptop. By using the NXP TJA1101 IEEE 802.3bw compliant ethernet PHY transceiver, ensure a trustworthy and effective tool to customers that are looking for a cost-efficient, quick and manageable solution for testing requirements, with no latency and no packet loss. Features with 100BASE-T1 Master/Slave configuration and link LED. The design makes it portable and easy to install in test racks. The galvanized sheet steel with black powder coating housing makes it robust. Plug and Play, No need to install the drivers. No customized driver is needed to interact with our 100BASE-T1-TX-N Media Converter. The device communicates with standard Ethernet through an RJ-45 connector. Github: https://github.com/INNO-MAKER/100BASE-T1TX-N Add to cart
Sale! 10Gbase-T1 SFP+/TX $1,900.00 Original price was: $1,900.00.$1,500.00Current price is: $1,500.00. About this item 10G/5G/2.5GBASE-T1 to 10G/5G/2.5G/1G/100M BASE-T (RJ45/SFP+) Full Duplex Conversion. point-to-point data transmission, with no delay, no data packet modification, and no data storage. Base on the Broadcom BroadR-Reach PHY bcm89890. Plug and Play, No need to install the drivers. TI port Support for Speed Fixed and Speed Auto-Negotiation Mode configuration By using the DIP switch, you can easily set the Speed mode of T1, the master/slave operation mode, and the Auto Negotiation mode. Features with Speed and link state indicator LED. A custom-made SFP+ to RJ45 module transceiver is included with the shipment. Please do not use other commercially available SFP+ to RJ45 modules with this setup. Add to cart
3.5 Inch SPI Display-Capacitive Touch $28.00 - $32.00 DATASHEET: http://wiki.inno-maker.com/display/HOMEPAGE/3.5-inch-lcd-c The 3.5 inch RPI lcd display TFT Capacitive Touch Screen is a display module can be applied to Raspberry pi 3 B+ Pi Zero etc. It can be used as raspberry pi x window display terminals. Use the Raspberry pi high-speed SPI interface transfer Linux frame buffer data to the TFT capacity touch screen RPI LCD display module. The SPI clock can reach as high as 63Mbps. The 3.5 inch LCD panel with this module have 16bit/pixel 320×480 high-resolution. The TFT Touch Screen RPI lcd display module equipped with high accuracy DS3231 hardware RTC unit make your Raspberry Pi system time no longer depend on the network. The RPI lcd display module can equip with resistive or capacitive tft touch screen. Two types of touch screen module can use the same software package. The TFT Touch Screen RPI lcd display module used SPI, I2C and some GPIO signal from Raspberry pi 40PIN interface. Other resource in 40PIN interface can be defined by users. Same size as Raspberry pi can be directly plugged on Raspberry pi. Add to cart
Sale! 8MP IMX219 camera module for jetson nano jetson xavier $10.00 - $15.00 raspberry pi camera v2 Sensor Type: Low-cost 8 Megapixel IMX219 Sensor, Static Images: 3280(H)x2464(V) pixel, Support 1080p@30fps, 720p@60fps and 640x480p@90fps video record. Lens: M12 Lens Seat, FOV62 Degree Lens, Focal Length: 2.8mm, Aperture (F) : 2.2, IR: 4G+IR. Compatible with raspberry pi series , jetson nano, jetson xavier Packing List: Module x1, FPC Cable x2, FOV62 Degree Camera Lens x1. Add to cart
Sale! 9P Color Cable For LA1010/LA2016/LA5016/LA5032 $8.00 Original price was: $8.00.$5.00Current price is: $5.00. Kingst Logic Analyzer Measurement Channel 9P Color Cable TL09 Silicone Wire Soft Cable With Clips Add to cart
Sale! CAM-IMX219-FOV90 $12.00 - $13.00 Feature Support raspberry PI,Jetson Nano CAM-IMX219 is a low-cost wide angle view camera module; Provide M12 90 degree Len Add to cart